Abstract
Photolithography is the foundational process at the root of micro-electromechanical (MEMS) and microfluidic systems manufacture. The process is descendant from the semiconductor industry, originating from printed circuit board and microprocessor fabrication, itself historically performed in a cleanroom environment utilizing expensive, specialist microfabrication equipment. Consequently, these conditions prove cost-prohibitive and pose a large barrier to entry. We present a novel homebrew, "do-it-yourself" method for performing photolithography to produce master mold wafers using only household appliances and homemade equipment at the bench side, outside of a cleanroom, producing a range of designs including spiral, serpentine, rectangular, and circulatory. Our homebrew processes result in the production of microfluidic channels with feature resolution of ∼85 μm width and 50 μm height utilizing inkjet-printed photomasks on transparency film to expose dry-film photoresist. From start to finish, the entire process takes under <90 min and costs <£300. With SU8 epoxy negative photoresist and a chrome photomask, our low-cost UV exposure apparatus and homemade spincoater could be used to produce PDMS devices containing large arrays of identical microwells measuring 4.4 μm in diameter. We show that our homebrew method produces both rectangular and spiral microfluidic channels with better results than can be achieved by SLA 3D printing by comparison, and amenable to bonding into multilayer functional microfluidic devices. As these methods are fundamental to microfluidics manufacture, we envision that this work will be of value to researchers across a broad range of disciplines, such as those working in resource-constrained countries or conditions, with many and widely varying applications.